Physicochemical Evolution of Hydrothermal Fluids in the Kuh-e-Esfand porphyry Copper System, South of Jiroft, Kerman Province

Document Type : Research Article

Authors

• Afsaneh Soltani ¹
• Alireza Zarasvandi ²
• Nader Taghipour ³
• Mohsen Rezaei ⁴
• Adel Saki ⁵
• Morteza Sajjadiyan ⁶
• Ghazal Zarasvandi ⁷

¹ Ph.D. Student, Department of Geology, Faculty of Earth Science, Shahid Chamran University of Ahvaz, Ahvaz, Iran

² Professor, Department of Geology, Faculty of Earth Science, Shahid Chamran University of Ahvaz, Ahvaz, Iran

³ Associate Professor, School of Earth Sciences, Damghan University, Damghan, Iran

⁴ Assistant Professor, Department of Geology, Faculty of Earth Sciences, Shahid Chamran University of Ahvaz, Ahvaz, Iran

⁵ Associate Professor, Department of Geology, Faculty of Earth Science, Shahid Chamran University of Ahvaz, Ahvaz, Iran

⁶ Senior expert in mineral exploration research, center of research and technology of Golgohar mining and industrial company, Kerman, Iran

⁷ M.Sc. student, Department of Geology, Faculty of Earth Science, Shahid Chamran University of Ahvaz, Ahvaz, Iran

10.22067/econg.2024.1108

Abstract

The Kuh-e-Esfand copper deposit is located in the southernmost part of the Urmia-Dokhtar magmatic belt. The Oligocene-Miocene intrusive bodies, ranging from diorite to quartz diorite and granodiorite, are emplaced within the Eocene volcanic complex. Based on the classification of veins- veinlets, the main mineralization stage consists of quartz pyrite chalcopyrite associated with potassic alteration. Based on petrographic studies, fluid inclusions in quartz minerals are categorized into three main groups and seven subgroups: 1- Vapor-rich fluid inclusions comprising single-phase vapor inclusions (V), vapor-rich two-phase inclusions (VL), and vapor-rich inclusions with a opaque phase (VLS), 2- Liquid-rich fluid inclusions including liquid-rich two-phase inclusions (LV) and liquid-rich inclusions with a opaque phase (LVS) and 3- Saline fluid inclusions consisting of simple brine three-phase inclusions (LVH), and multi-phase brine inclusions (LVHS) containing solid phases of halite± hematite± anhydrite± sylvite± chalcopyrite. The multi-phase saline inclusions with high temperature and salinity (358-598°C and 42-70 wt.% NaCl equivalent) of magmatic origin are the primary fluid inclusions forming the deposit. The two-phase liquid-rich inclusions with lower temperature and salinity (290-490°C and 11-20 wt.% NaCl equivalent) of magmatic-meteoric origin are related to the final stages of hydrothermal fluid circulation and mixing with lower salinity fluids. The temperature decrease due to secondary boiling and mixing of magmatic and meteoric fluids led to the instability of the chloride complex carrying copper and subsequent mineralization under favorable conditions.
 
Introduction
Porphyry deposits are the major global source of Cu, Mo, and Re, along with being noteworthy reservoirs of Au and Ag (Sillitoe, 2010; Arndt and Ganino, 2012; Crespo et al., 2020). Exploration techniques aimed at optimizing the discovering new deposits are evolving towards a deeper understanding of ore genesis. Fluid inclusion studies serve as an enhanced technique to delineate the nature of ore-forming fluids and the processes governing deposit formation (Wilkinson, 2001), alongside other key geological aspects such as tectonic setting, mineral alteration, vein structure, ore-forming zones, and metal transportation and concentration dynamics (Singer et al., 2002; Sillitoe, 2010; Zajacz et al., 2017). Extensive studies have examined the physicochemical conditions, origins, and evolution of hydrothermal fluids in porphyry deposits globally, including in Iran, through fluid inclusion studies. The Kuh-e-Esfand porphyry copper deposit is located in Kerman province, Iran, approximately 90 kilometers southeast of Jiroft. Currently, the deposit is under exploration, and drilling activities are underway to obtain precise information on the type, composition, quantity, and economic potential of mineral reserves for evaluation and extraction purposes. Since fluid inclusion studies contribute to understanding hydrothermal processes as mineralizing agents, in this study focuses on detailed fluid inclusion studies, including petrography and microthermometry, to understand the nature and evolution of ore-forming fluids, as well as the physicochemical processes influencing mineral precipitation in the Kooh-Esfand deposit.
 
Materials and methods
In this study, 15 surface samples and 48 drill core samples were utilized for detailed investigations, with BH2, BH3, and BH4 boreholes being drilled at depths of 506 m, 475 m, and 496 m respectively. BH2 and BH3 were drilled into the intrusive mass, while BH4 was drilled into the volcanic unit, encountering a quartz diorite intrusive mass at 340 m depth. Among the selected samples, 42 thin section samples and 11 polished thin sections were prepared and examined. Petrographic studies of fluid inclusions were conducted using optical microscopy, and samples were separated from the veins in mineralogy and fluid laboratories. Temperature and salinity parameters of fluid inclusions in quartz minerals were measured at Pamukkale University in Denizli, Turkey, and part of it was conducted at Tarbiat Modares University in Tehran. In Pamukkale University's laboratory, fine grain size measurements were carried out using a Linkam THMSG 600 freeze-thaw stage equipped with an Olympus microscope. This stage was calibrated using H₂O-CO₂ fluid inclusions at temperatures of 1.1°C, 0.0°C, and -56.6°C. The upper and lower temperature thresholds for fine grain size measurements were 600°C and -120°C respectively. The heating rate was set at 1°C per minute for determining the homogenization temperature or ice melting temperature. At Tarbiat Modares University, temperature measurements on sections were conducted using a THMCG600 heating-cooling stage equipped with a Leitz microscope, with a temperature range of -196°C to +600°C. Calibration of the stage was performed using C4H₃CH₃ at 95°C and KNO₃ at 335°C.
 
Result
The study area encompasses three distinct geological units: volcanic, volcaniclastic, and intrusive units. The intrusive unit range in composition from diorite to quartz-diorite and granodiorite. Various alteration zones, such as potassic alteration, quartz-sericite-feldspar alkaline ± chlorite alteration, phyllic alteration, argillic alteration, and propylitic alteration, have significantly influenced the lithological units in the study area. On the basis of vein classification, the early stage of mineralization predominantly is characterized by quartz ± chalcopyrite ± magnetite ± pyrite veins. The main mineralization stage is characterized by quartz + pyrite + chalcopyrite veins associated with potassic alteration and quartz-sericite-alkali feldspar-chlorite zone. Post mineralization stage is characterized by quartz-pyrite veins. Due to pressure variations from lithostatic to hydrostatic conditions, substantial copper mineralization likely occurred during the main mineralization stage, with comparatively lesser molybdenum mineralization observed in quartz-pyrite-chalcopyrite and quartz-pyrite-chalcopyrite-molybdenite veins. These mineralization stages, often accompanied by abundant vapor-rich and multi-phase fluid inclusions, initiated ore formation through fluid boiling processes.
Based on petrographic studies, fluid inclusions in quartz minerals are categorized into three main groups and seven subgroups: 1- Vapor-rich fluid inclusions comprising single-phase vapor inclusions (V), vapor-rich two-phase inclusions (VL), and vapor-rich inclusions with a opaque phase (VLS) (including chalcopyrite, possibly magnetite, and unidentified opaque phases), 2- Liquid-rich fluid inclusions including liquid-rich two-phase inclusions (LV) and liquid-rich inclusions with a opaque phase (VLS) containing opaque minerals (such as chalcopyrite and unidentified opaque phases), and 3- Saline fluid inclusions consisting of simple brine three-phase inclusions (LVH) containing liquid+ vapor+ halite, and multi-phase brine inclusions (LVHS) containing vapor+ liquid+ halite± hematite± anhydrite± sylvite± chalcopyrite.  
 
Discussion
The relationship between different types of fluid inclusions in the Kuh-Esfand deposit is established through detailed petrographic and micrometerometric investigations. In microthermometric studies, the relationship between different types of fluid inclusions, including liquid-rich, vapor-rich, three-phase, and multiphase inclusions, is investigated to examine the origin and evolution process of the hydrothermal fluid. This investigation is based on variations in homogenization temperature and salinity content.
By analyzing variations in homogenization temperature and salinity, these investigations provide valuable insights into the processes governing fluid evolution in the Kuh- e- Esfand copper deposit.
On the basis of the microthermometric analyses, the observed changes in homogenization temperature and salinity indicate a systematic decrease from multiphase fluid inclusions to liquid-rich fluid inclusions. Interestingly, vapor-rich fluid inclusions exhibit homogenization temperatures comparable to the upper end of the temperature range observed in multiphase fluid inclusions.
Primary fluid inclusions of magmatic origin encompass vapor-rich inclusions characterized by elevated homogenization temperatures (330-600 °C) and diminished salinities (12-22 wt.% NaCl eq.), multisolid fluid inclusions exhibiting extended temperature ranges (385-598 °C) and heightened salinities (42-70 wt.% NaCl eq.), and three-phase fluid inclusions demonstrating significant temperature variations (230-590 °C) alongside elevated salinities (35-65 wt.% NaCl eq.). The presence of multi-phase fluid inclusions is indicative of the initial hydrothermal fluids responsible for the formation of the Kuh-e-Esfand deposit. Conversely, fluid inclusions of magmatic-meteoric source encompass liquid-rich inclusions characterized by homogenization temperatures and reduced salinities (290-490 °C and 11-20 wt.% NaCl eq., respectively). This particular fluid inclusion type signifies the terminal phase of hydrothermal fluid circulation, characterized by interaction and dilution with lower salinity meteoric fluids. The depth of the Kuh-e-Esfand deposit ranges from 0.8 to 1.7 kilometers, with an average depth of 1.4 kilometers (equivalent to 1400 meters). This translates to pressures ranging from 215 to 603 bars on average, with an average hydrostatic pressure of 412 bars and a lithostatic pressure of 1112 bars.
In the Kuh-e-Esfand deposit, fluid inclusions exhibit a sequence of influential processes, including secondary boiling phenomena, fluid immiscibility, the interaction of magmatic fluids with meteoric waters, and isothermal mixing, throughout the hydrothermal fluid evolution. Vapor-rich fluid inclusions, characterized by the presence of opaque minerals (e.g., chalcopyrite), are infrequently observed in the Kuh-e-Esfand deposit, suggesting that the brine phase predominantly facilitates the transport of copper metal. Finally, the decrease in temperature due to secondary boiling and mixing of magmatic fluids with meteoric fluids has led to the destabilization of the chloride complex, the primary carrier of copper in the studied deposit, and its deposition under favorable conditions.
 
Acknowledgements
This article is part of a research project with contract number 4304/00 with the Golgohar company. We would like to express our gratitude and appreciation Rahim Satouh Bahreini, the esteemed manager of this department, and his colleagues.

Keywords

• Fluid inclusions
• secondary boiling
• Fuid mixing
• vein-veinlet
• Kuh-e-Esfand
• Urumieh-Dokhtar magmatic belt

---

References

Aftabi, A. and Atapour, H., 2009. Comments on Arc magmatism and subduction history beneath the Zagros Mountains, Iran: A new report of adakites and geodynamic consequences by J. Omrani, P. Agard, H. Whitechurch, M. Bennoit, G. Prouteau, L. Jolivet. Lithos, 113(3–4): 844–846. https://doi.org/10.1016/j.lithos.2009.04.032

Aghazadeh, M. 2015. Petrogenesis and U-Pb Age Dating of Intrusive Bodies in the Sarcheshmeh Deposit. Scientific Quarterly Journal of Geosciences, 25(97): 291–312. https://doi.org/10.22071/gsj.2015.41516

Aghazadeh, M., Hou, Z., Badrzadeh, Z. and Zhou, L., 2015. Temporal–spatial distribution and tectonic setting of porphyry copper deposits in Iran: constraints from zircon U–Pb and molybdenite Re–Os geochronology. Ore geology reviews, 70: 385–406. https://doi.org/10.1016/j.oregeorev.2015.03.003

Ahmad, S.N. and Rose, A.W., 1980. Fluid inclusions in porphyry and skarn ore at Santa Rita, New Mexico. Economic Geology, 75(2): 229–250. https://doi.org/10.2113/gsecongeo.75.2.229

Arndt, N.T. and Ganino, C., 2012. Metals and society: An introduction to economic geology: Berlin. Springer-Verlag, Germany, 160 pp. https://doi.org/10.1007/978-3-642-22996-1

Asadi, S., Moore, F. and Fattahi, N., 2012. Fluid inclusion and stable isotope constraints on the genesis of the Jian copper deposit, SanandajSirjan metamorphic zone, Iran. Geofluids, 13(1): 66–81. https://doi.org/10.1111/gfl.12013

Atapour, H., 2017. The exploration significance of Ag/Au, Au/Cu, Cu/Mo,(Ag× Au)/(Cu× Mo) ratios, supra-ore and sub-ore halos and fluid inclusions in porphyry deposits: a review. Journal of Sciences, Islamic Republic of Iran, 28(2): 133–146. https://jsciences.ut.ac.ir/article_60750.html

Atapour, H. and Aftabi, A., 2021. Petrogeochemical evolution of calcalkaline, shoshonitic and adakitic magmatism associated with Kerman Cenozoic arc porphyry copper mineralization, southeastern Iran: A review. Lithos, 398–399: 106261. https://doi.org/10.1016/j.lithos.2021.106261

Avalos, S. and Avalos, N., 2023. Fluid inclusions technique for porphyry deposit exploration: The Rosario porphyry Cu-Mo deposit. https://doi.org/10.31223/X5H083

Becker, S.P., Fall, A. and Bodnar, R.J., 2008. Synthetic fluid inclusions. XVII. 1 PVTX properties of high salinity H₂O-NaCl solutions (> 30 wt.% NaCl): Application to fluid inclusions that homogenize by halite disappearance from porphyry copper and other hydrothermal ore deposits. Economic Geology, 103(3): 539–554. https://doi.org/10.2113/gsecongeo.103.3.539

Bodnar, R.J., 1994. Synthetic fluid inclusions: XII. The system H₂O NaCl. Experimental determination of the halite liquidus and isochores for a 40 wt.% NaCl solution. Geochimica et Cosmochimica Acta, 58(3): 1053–1063. https://doi.org/10.1016/0016-7037(94)90571-1

Bodnar, R.J. and Beane, R.E., 1980. Temporal and spatial variations in hydrothermal fluid characteristics during vein filling in preore cover overlying deeply buried porphyry copper-type mineralization at Red Mountain, Arizona. Economic Geology, 75(6): 876–893. https://doi.org/10.2113/gsecongeo.75.6.876

Bodnar, R.J., Lecumberri-Sanchez, P., Moncada, D. and Steele-MacInnis, M., 2014. 13.5–Fluid inclusions in hydrothermal ore deposits. Treatise on geochemistry, 13: 119–142.  https://doi.org/10.1016/B978-0-08-095975-7.01105-0

Bodnar, R.J. and Vityk, M.O. 1994. Interpretation of microthermometric data for H2O-NaCl fluid inclusions. In B. de Vivo and M. L. Frezzotti (Eds.), Fluid Inclusions in Minerals, Methods and Applications. Virginia Tech, Blacksburg, Virginia, 117–130 pp. Retrieved June 21, 2024 from https://www.researchgate.net/file.PostFileLoader.html?id=59d2e7af3d7f4bcbe2356849&assetKey=AS%3A545186906206209%401506994095585

Borisenko, A.‌S., 1977. Studies of salinity of gas-liquid inclusions in minerals by the cryometric method. Soviet Geology and Geophysics 18: 11–19. Retrieved June 21, 2024 from https://www.researchgate.net/publication/283688999

Bouzari, F. and Clark, A.H., 2006. Prograde evolution and geothermal affinities of a major porphyry copper deposit: the Cerro Colorado hypogene protore, I Región, northern Chile. Economic Geology, 101(1): 95–134. https://doi.org/10.2113/gsecongeo.101.1.95

Brown, P.E., 1989.  FLINCOR; a microcomputer program for the reduction and investigation of fluid-inclusion data. American Mineralogist, 74(11–12): 1390–1393. Retrieved June 21, 2024 from https://pubs.geoscienceworld.org/msa/ammin/article-abstract/74/11-12/1390/42220/

Cline, J.S. and Bodnar, R.J., 1991. Can economic porphyry copper mineralization be generated by a typical calc‐alkaline melt? Journal of Geophysical Research: Solid Earth, 96(B5): 8113–8126. https://doi.org/10.1029/91JB00053

Cline, J.S. and Bodnar, R.J., 1994. Direct evolution of brine from a crystallizing silicic melt at the Questa, New Mexico, molybdenum deposit. Economic Geology, 89(8): 1780–1802. https://doi.org/10.2113/gsecongeo.89.8.1780

Conrad, G., Conrad, J. and Girod, M., 1977. Les formation continentales tertiaries et quaternaries du bolc Lout Iran. Importance du plutonisme et du volcanisme. Memoirs of the Historical Series of the Geological Society France, 8: 53–75. Retrieved June 21, 2024 from http://pascal-francis.inist.fr/vibad/index.php?action=getRecordDetail&idt=PASCALGEODEBRGM7720435244

Crespo, J., Reich, M., Barra, F., Verdugo, J.J., Martínez, C., Leisen, M., Romero, R., Morata, D. and Marquardt, C., 2020. Occurrence and distribution of silver in the world-class Río Blanco Porphyry Cu-Mo deposit, central Chile. Economic Geology, 115(8): 1619–1644. https://doi.org/10.5382/econgeo.4778

Cunningham, C.G., 1978. Pressure gradients and boiling as mechanisms for localizing ore in porphyry systems. Research United States Geological Survey, 6(6): 745–754.

Dimitrijevic, M.‌D. 1973. Geology of Kerman Region. Institute for Geological and Mining Exploration and Investigation of Nuclear and Other Mineral Raw Materials, Belgrade. Geological Survey of Iran, Report Yu/52. 334 pp. Retrieved June 21, 2024 from https://search.worldcat.org/title/geology-of-kerman-region/oclc/8699834

Drummond, S.E. and Ohmoto, H., 1985. Chemical evolution and mineral deposition in boiling hydrothermal systems. Economic Geology, 80(1): 126–147. https://doi.org/10.2113/gsecongeo.80.1.126

Fournier, R.O., 1987. Conceptual models of brine evolution in magmatic-hydrothermal systems. U.S. Geological Survey Professional Paper. 1350: 1487–1505. Retrieved June 21, 2024 from https://pubs.usgs.gov/pp/1987/1350/pdf/chapters/pp1350_ch55.pdf

Goldstein, R.H., 2003. Petrographic analysis of fluid inclusions. In: Samson, I., Anderson, A. and Marshall, D (Editors), Fluid Inclusions: Analysis and Interpretation. Mineralogical Association of Canada, Short Course Handbook, pp. 32–53. Retrieved June 21, 2024 from https://pubs.geoscienceworld.org/mac/books/edited-volume/2433/chapter-abstract/135797493/PETROGRAPHIC-ANALYSIS-OF-FLUID-INCLUSIONS?redirectedFrom=fulltext

Golestani, M., Karimpour, M.‌H., Malekzadeh Shafaroudi, A. and Haidarian Shahri, M.R. 2017. Characterization of fluid inclusions and sulfur isotopes in the Iju porphyry copper deposit, North West of Shahr-e-Babak. Journal of Economic Geology, 9(1): 25–55. (in Persian with English abstract) https://doi.org/10.22067/econg.v9i1.60709

Habibi, T. and Hezarkhani, A., 2013. Hydrothermal evolution of Daraloo porphyry copper deposit, Iran: evidence from fluid inclusions. Arabian Journal of Geosciences, 6: 1945–1955. https://doi.org/10.1007/s12517-011-0488-z

Hassanzadeh, J., 1993. Metallogenic and Tectonomagmatic Events in the SE Sector of the Cenozoic Active Continental Margin of Central Iran (Shahr e Babak area, Kerman Province). Ph.D. Thesis, University of California, Los Angeles, United States of America, 204 pp.

Hezarkhani, A., 2009. Hydrothermal fluid geochemistry at the Chah-Firuzeh porphyry copper deposit, Iran: Evidence from fluid inclusions. Journal of Geochemical Exploration, 101(3): 254–264. https://doi.org/10.1016/j.gexplo.2008.09.002

Hosseinzadeh, M., Maghfouri, S., Ghorbani, M. and Moayyed, M., 2016. Different types of vein- veinlets related to mineralization and fluid inclusion studies in the Sonajil porphyry Cu- Mo deposit, Arasbaran magmatic zone. Scientific Quarterly Journal of Geosciences, 26(101): 219–230.  https://doi.org/10.22071/gsj.2016.41069

Ioannou, S.E., Spooner, E.T.C. and Barrie, C.T., 2007. Fluid temperature and salinity characteristics of the Matagami volcanogenic massive sulfide district, Quebec. Economic Geology, 102(4): 691–715. https://doi.org/10.2113/gsecongeo.102.4.691

John, D.A. and Taylor, R.D., 2016. By-products of porphyry copper and molybdenum deposits. Society of Economic Geologists, Inc. Reviews in Economic Geology, 18: 137–164. https://doi.org/10.5382/Rev.18.07

Kesler, S.E., 2005. Ore-forming fluids. Elements, 1‌(1): 13–18. https://doi.org/10.2113/gselements.1.1.13

Khosravi, M., Rajabzadeh, M.A., Mernagh, T.P., Qin, K., Bagheri, H. and Su, S., 2020. Origin of the ore-forming fluids of the Zefreh porphyry Cu–Mo prospect, central Iran: Constraints from fluid inclusions and sulfur isotopes. Ore Geology Reviews, 127: 103876. https://doi.org/10.1016/j.oregeorev.2020.103876

Large, R.R., Bull, S.W., Cooke, D.R. and McGoldrick, P.J. 1998. A genetic model for the HYC Deposit, Australia; based on regional sedimentology, geochemistry, and sulfide-sediment relationships. Economic Geology, 93(8): 1345–1368. https://doi.org/10.2113/gsecongeo.93.8.1345

Lerchbaumer, L. and Audétat, A., 2012. High Cu concentrations in vapor-type fluid inclusions: An artifact? Geochimica et Cosmochimica Acta, 88: 255–274. https://doi.org/10.1016/j.gca.2012.04.033

Maanijou, M., Mostaghimi, M., Abdollahi Riseh, M. and Sepahi, A. A. 2012. Systematic sulfur stable isotope and fluid inclusion studies on veinlet groups in the Sarcheshmeh porphyry copper deposit: based on new data. Journal of Economic Geology, 4(2): 217–239. (in Persian with English abstract) https://doi.org/10.22067/econg.v4i2.16492

Maanijou, M., Mostaghimi, M., Abdollahy Riseh, M. and Sepahi, A. A., 2020. Petrology and tectonic settings of the Sarcheshmeh porphyry copper deposit with emphasis on granodiorite and quartz eye porphyry. Journal of Economic Geology, 12(3): 269–297. (in Persian with English abstract) https://doi.org/10.22067/econg.v12i3.80951

Maanijou, M., Mostaghimi, M., Riseh, M.A., Lentz, D.R. and Sepahi Gerow, A.A., 2022. Petrology and geochemistry of adakitic intrusions and dykes at Sarcheshmeh porphyry Cu‐Mo±Au deposit, Iran: Insights into their source. Resource Geology, 72(1): 12297. https://doi.org/10.1111/rge.12297

Malekshahi, S., Khalajmasoumi, M., Mohammad- Doost, H., Sojdehee, M. and Aboutorab, S., 2023. Study of Alterations, fluid inclusions and sulfur and oxygen isotope compositions in Sarkuh porphyry copper deposit, Kerman.  Scientific Quarterly Journal of Geosciences, 33(3): 159–182. https://doi.org/10.22071/gsj.2023.363665.2033

McQuarrie, N., Stock, J.M., Verdel, C. and Wernicke, B.P., 2003. Cenozoic evolution of Neotethys and implications for the causes of plate motions. Geophysical research letters, 30(20). https://doi.org/10.1029/2003GL017992

McQuarrie, N. and van Hinsbergen, D.J., 2013. Retrodeforming the Arabia-Eurasia collision zone: Age of collision versus magnitude of continental subduction. Geology, 41(3): 315–318. https://doi.org/10.1130/G33591.1

Mohammadi Qaqab, H. and Taghipour, N., 2011. Physico-chemical evolution of hydrothermal fluid in Sara porphyry copper deposit (Percom), Kerman province. Advanced Applied Geology, 1(1): 11–24. (in Persian with English abstract) Retrieved June 21, 2024 from https://aag.scu.ac.ir/article_11540.html?lang=en

Nateghi, A. and Hezarkhani, A., 2013. Fluid inclusion evidence for hydrothermal fluid evolution in the Darreh-Zar porphyry copper deposit, Iran. Journal of Asian Earth Sciences, 73: 240–251. https://doi.org/10.1016/j.jseaes.2013.04.037

Natghi, A. and Ghorbani Shadpi, R., 2015. The application of fluid inclusions in the exploration of deposits: a case study in the exploration area of Hamza Dareh, The first specialized and national conference on the application of fluids involved in earth sciences, Zanjan, Iran. Retrieved June 21, 2024 from https://civilica.com/doc/421248

Rahmani, H. and Ghorbani, M., 2023. Geology, mineralization, sulfur isotope and fluid inclusion studies in alteration zones in Cu-Au-Mo south of Zahedan porphyry prospect (SE Iran). International Journal of Mining and Geo-Engineering, 57(3): 283–298. Retrieved June 21, 2024 from https://ijmge.ut.ac.ir/article_92580.html

Rasoli, J., Ghorbani, M. and Ahadinegad, V. 2017. The U-Pb dating of Jebale Barez plutonic complex: Evidence for the Old Iranian basement in the SE of Urumieh-Dokhtar magmatic zone. Iranian Journal of Crystallography and Mineralogy, 25‌(2): 245–258. Retrieved June 21, 2024 from http://ijcm.ir/article-1-788-en.html

Roedder, E., 1971. Fluid inclusion studies on the porphyry-type ore deposits at Bingham, Utah, Butte, Montana, and Climax, Colorado. Economic Geology, 66(1): 98–118. https://doi.org/10.2113/gsecongeo.66.1.98

Roedder, E., 1972. Composition of fluid inclusions. U.S. Geological Survey Professional Paper, Washington, Report 440, 163 pp. https://doi.org/10.3133/pp440JJ

Roedder, E., 1984. Fluid inclusions. De Gruyter, Berlin, Boston. 644 pp. https://doi.org/10.1515/9781501508271

Rusk, B.G., Reed, M.H. and Dilles, J.H., 2008. Fluid inclusion evidence for magmatic-hydrothermal fluid evolution in the porphyry copper-molybdenum deposit at Butte, Montana. Economic Geology, 103(2): 307–334. https://doi.org/10.2113/gsecongeo.103.2.307

Seo, J.H. and Heinrich, C.A., 2013. Selective copper diffusion into quartz-hosted vapor inclusions: Evidence from other host minerals, driving forces, and consequences for Cu–Au ore formation. Geochimica et Cosmochimica Acta, 113: 60–69. https://doi.org/10.1016/j.gca.2013.03.016

Shafiei, B., Haschke, M. and Shahabpour, J., 2009. Recycling of orogenic arc crust triggers porphyry Cu mineralization in Kerman Cenozoic arc rocks, southeastern Iran. Mineralium Deposita, 44:.265-283. http://dx.doi.org/10.1007/s00126-008-0216-0

Shelton, K.L., 1983. Composition and origin of ore-forming fluids in a carbonate-hosted porphyry copper and skarn deposit, a fluid inclusion and stable isotope study of Mines Gaspe Quebec. Economic Geology, 78(8): 387–421. https://doi.org/10.2113/gsecongeo.78.3.387

Shepherd, T.‌J., Rankin, A.‌H. and Alderton, D.‌H.‌M. 1985. A practical guide to fluid inclusion studies. Blackie, Glasgow, New York. Retrieved June 21, 2024 from https://search.worldcat.org/title/12082734

Siivola, J. and Schmid, R., 2007. List of Mineral Abbreviations: Recommendations by the IUGS Subcommission on the Systematics of Metamorphic Rocks: Web version 01.02.07. (Electronic Source), Retrieved June 21, 2024 from https://www.B2n.ir/f95089

Sillitoe, R.H., 2010. Porphyry copper systems. Economic geology, 105(1): 3–41. https://doi.org/10.2113/gsecongeo.105.1.3

Singer, D.A., Berger, V.I. and Moring, B.C., 2002. Porphyry copper deposits of the world: Database, maps, and preliminary analysis, US Geological Survey, Report 02-268. Retrieved June 21, 2024 from https://pubs.usgs.gov/of/2002/0268/pdf/of02-268.pdf

Singer, D.A., Berger, V.I. and Moring, B.C., 2008. Porphyry copper deposits of the world: Database and grade and tonnage models, US Geological Survey, Washington, 2008(2008-1155), 46 pp. US Geological Survey. Retrieved June 21, 2024 from https://pubs.usgs.gov/of/2008/1155/of2008-1155.pdf

Taghipour, N., 2007. The Application of Fluid Inclusions and Isotope Geochemistry as Guides for Exploration, Alteration and Mineralization at the Miduk Porphyry Copper Deposit, Shar-e-Babak, Kerman. Unpublished Ph.D. thesis, Shahid Bahonar University, Kerman, Iran, 305 pp.

Taghipour, N., Asgari, Gh., Dorani, M. and Mortezanezhad, Gh. R., 2020. Conducting prospecting and general exploration services in the northern and southern areas of the Bam exploration Block, Kerman Province, Iran, University of Damghan, University of Damghan, Report 112, 337 pp. Unpubished report.

Thiersch, P.C., Williams-Jones, A.E. and Clark, J.R., 1997. Epithermal mineralization and ore controls of the Shasta Au-Ag deposit, Toodoggone district, British Columbia, Canada. Mineralium Deposita, 32: 44–57. https://doi.org/10.1007/s001260050071

Ulrich, T., Günther, D. and Heinrich, C.A., 2001. The evolution of a porphyry Cu-Au deposit, based on LA-ICP-MS analysis of fluid inclusions: Bajo de la Alumbrera, Argentina. Economic Geology, 96(8): 1743–1774. https://doi.org/10.2113/gsecongeo.96.8.1743

Ulrich, T. and Mavrogenes, J., 2008. An experimental study of the solubility of molybdenum in H2O and KCl–H2O solutions from 500 C to 800 C, and 150 to 300 MPa. Geochimica et Cosmochimica Acta, 72(9): 316–2330. https://doi.org/10.1016/j.gca.2008.02.014

Van den Kerkhof, A.M. and Hein, U.F., 2001. Fluid inclusion petrography. Lithos, 55(1–4): 27–47. https://doi.org/10.1016/S0024-4937(00)00037-2

Wang, Y., Chen, H., Xiao, B., Han, J., Fang, J., Yang, J. and Jourdan, F., 2018. Overprinting mineralization in the Paleozoic Yandong porphyry copper deposit, Eastern Tianshan, NW China—Evidence from geology, fluid inclusions and geochronology. Ore Geology Reviews, 100: 148–167. https://doi.org/10.1016/j.oregeorev.2017.04.013

Wang, R., Zhu, D., Wang, Q., Hou, Z., Yang, Z., Zhao, Z. and Mo, X., 2020. Porphyry mineralization in the Tethyan orogen. Science China Earth Sciences, 63: 2042–2067. https://doi.org/10.1007/s11430-019-9609-0

Waterman, G.C. and Hamilton, R.L., 1975. The Sar Cheshmeh porphyry copper deposit. Economic Geology, 70(3): 568–576. https://doi.org/10.2113/gsecongeo.70.3.568

Wilkinson, J.J., 2001. Fluid inclusions in hydrothermal ore deposits. Lithos, 55(1–4): 229–272. https://doi.org/10.1016/S0024-4937(00)00047-5

Williams-Jones, A.E. and Heinrich, C.A., 2005. 100th Anniversary special paper: vapor transport of metals and the formation of magmatic-hydrothermal ore deposits. Economic Geology, 100(7): 1287–1312. https://doi.org/10.2113/gsecongeo.100.7.1287

Zajacz, Z., Candela, P.A. and Piccoli, P.M., 2017. The partitioning of Cu, Au and Mo between liquid and vapor at magmatic temperatures and its implications for the genesis of magmatic-hydrothermal ore deposits. Geochimica et Cosmochimica Acta, 207: 81–101. https://doi.org/10.1016/j.gca.2017.03.015

Zarasvandi, A.‌R., Davoodian Ranjbar, F., Rezaei, M., Tashi, M. and Pourkaseb, H., 2020. Physicochemical attributes of potassic alteration zone in Sarkuh porphyry copper deposit; using biotite and chlorite chemistry. Scientific Quarterly Journal of Geosciences, 29(114): 279–288. https://doi.org/10.22071/gsj.2019.116399.1390

Zarasvandi, A., Liaghat, S., Lentz, D. and Hossaini, M., 2013. Characteristics of Mineralizing Fluids of the Darreh‐Zerreshk and Ali‐Abad Porphyry Copper Deposits, Central I ran, Determined by Fluid Inclusion Microthermometry. Resource Geology, 63(2): 188–209. https://doi.org/10.1111/rge.12004

Zarasvandi, A., Rezaei, M., Raith, J.G., Asadi, S. and Lentz, D., 2019. Hydrothermal fluid evolution in collisional Miocene porphyry copper deposits in Iran: Insights into factors controlling metal fertility. Ore Geology Reviews, 105: 183–200. https://doi.org/10.1016/j.oregeorev.2018.12.027

Zhang, F.F., Wang, Y.H., Xue, C.J., Liu, J.J. and Zhang, W., 2019. Fluid inclusion and isotope evidence for magmatic-hydrothermal fluid evolution in the Tuwu porphyry copper deposit, Xinjiang, NW China. Ore Geology Reviews, 113: 103078. https://doi.org/10.1016/j.oregeorev.2019.103078

Zhang, L., Zheng, Y. and Chen, Y., 2012. Ore geology and fluid inclusion geochemistry of the Tiemurt Pb–Zn–Cu deposit, Altay, Xinjiang, China: a case study of orogenic-type Pb–Zn systems. Journal of Asian Earth Sciences, 49: 69–79. https://doi.org/10.1016/j.jseaes.2011.11.019

Zimmerman, A., Stein, H.J., Hannah, J.L., Koželj, D., Bogdanov, K. and Berza, T. 2008. Tectonic configuration of the Apuseni–Banat—Timok–Srednogorie belt, Balkans-South Carpathians, constrained by high precision R e–O s molybdenite ages. Mineralium Deposita, 43: 1–21. http://dx.doi.org/10.1007/s00126-007-0149-z

Zimmerman, A., Stein, H.J., Morgan, J.W., Markey, R.J. and Watanabe, Y. 2014. Re–Os geochronology of the El Salvador porphyry Cu–Mo deposit, Chile: tracking analytical improvements in accuracy and precision over the past decade. Geochimica et Cosmochimica Acta, 131: 13–32. https://doi.org/10.1016/j.gca.2014.01.016