Chemical Compositions of Fluid Inclusions in the Jalal –Abad iron oxide deposit, North West of Zarand, Using LA-ICP-MS Microanalysis

Document Type : Research Article

Authors

Kharazmi

Abstract

Introduction
The Poshtebadam Bafq Zarand district in central Iran is a world class iron oxide province. This region contains over two billion tons of iron ore reserves within more than 34 major magnetic anomalies and deposits in an area of 7,500 km2 (Stosch et al., 2011). The Jalal-Abad iron ore deposit (200Mt at 45% Fe, 1.18% S and 0.08% P) is located 38 km northwest of Zarand, 16 km southeast of the Rizu town in the Kerman province, Iran. Iron ore deposits are hosted by the Early Cambrian Rizu Series, composed mainly of sedimentary, volcanic and volcaniclastic rocks which are dominated by dolomite, sandstone, shale, siltstone, tuff, ignimbrite and rhyodacite. The origin of the iron oxide deposits is controversial and various genetic models have been suggested. Some researchers believe in magmatic origins or Kiruna type, while others suggest metasomatic replacement from pre-existing rocks (Stosch et al., 2011). LA-ICP-MS has been used to characterize the multi element chemistry of the diverse fluid inclusions found in the Jalal–Abad iron oxide deposit. The aim of this investigation was to understand the genesis of the ore body and identify possible hydrothermal fluid sources in the Jalal-Abad district.

Sampling and method of study
About 100 samples from different types of ore were collected from surface outcrops and a drill core whose association with mineralization are well established. Thin sections, polished thin sections and polished sections were prepared. SEM studies (FEI 5900LV) and LA-ICP-MS analyses of fluid inclusions were carried out in the School of Earth and Environment, the University of Leeds, UK. Fluid inclusions were studied using a Linkam THM-600 heating-freezing stage mounted on Zeiss petrography microscope at the Iranian Mineral Processing Research Center.

Result and discussion
Jalal Abad deposit is hosted by the early Cambrian volcano-sedimentary rocks of the Rizu series. Stratabound mineralization occurs in a variety of forms being massive, disseminated, replacement, open space filling, veins and breccias. Immediate host rocks include sandy siltstone, acidic volcanic rocks and dolomite. The Jalal Abad deposit mainly consists of iron oxides (magnetite, hematite and goethite), pyrite, chalcopyrite, and malachite that occur in massive, brecciated, open space filling, disseminated and vein forms. Hematite mostly occurs close to the surface and along fractured zones, formed as a secondary mineral due to magnetite oxidation and it is rare at depth. Pyrite is the most important sulphide mineral and is associated with magnetite, calcite, quartz, talc, dolomite, actinolite and chlorite. Copper mineralization at shallow levels is mainly in oxides formed from sulphide oxidation and at deeper levels primary chalcopyrite is also associated with magnetite. Cu mineralization is formed as disseminated or in veins form. Native gold was detected as inclusions smaller than 50 µm in chalcopyrite. Common alteration minerals are goethite, pyrite, talc, actinolite, chlorite, tremolite, dolomite, quartz, calcite, albite and sericite. The earliest hydrothermal alteration includes Na-Ca alteration which is associated with actinolite, magnetite and pyrite. Multiphase fluid inclusions (L+V+S) in quartz are abundant and homogenization temperatures are in the range of 260 to 440◦C. Salinities vary between 30 to 52 wt% NaCl equivalents.
The concentrations of Na and K are in the range 26906 to 140716 ppm and 2372 to 70484 ppm, respectively. Fe content varies from 576 to16076 ppm with an average of 6914 ppm and Cu contents vary from 51 to 3204 ppm with a mean of 792 ppm. The Na/Ca values for fluid inclusions vary from 0.38 to 37.51 with a mean of 3.79. The average content of Na is 61511 ppm which is in agreement with salinity of fluid inclusions measured by microthermometry techniques. Magmatic fluids normally yield K > Ca, with Ca/K ratios between 0.01 to 1, whereas non magmatic fluids are often richer in Ca with Ca/K between 1 to 100 (Yardley, 2005). The amounts of Fe and Cu in magmatic fluids are commonly above 10000 and 1000 ppm, respectively. However, it depends on chlorinity (Fisher and Kendrick, 2008; Gillen, 2010; Appold and Wenz, 2011). Mn concentrations are 424 to 3645 ppm, with an average concentration of 7581 ppm. Mn/Fe ratio is varied from 0.21 to 1.87 with an average of 0.60.The wide range of homogenization temperature (170 -450 °C) and salinity (31- 52 wt % NaCl equiv) of the fluid inclusions and ratios of K/Ca in fluid inclusions indicate different fluid sources with magmatic and basinal type fluids (Yardley, 2005). Mn/Fe ratios in fluid inclusions are in wide ranges (0.21 -1.87) which indicate the presence of both reduced type and oxidized type fluids (Fisher and Kendrick, 2008).

Results
In addition to iron oxide, economical Cu mineralization occurs in the Jalal Abad deposit with Au, Bi and As mineralzation with insignificant apatite. The K, Fe, Ca, Na and Cu concentrations in fluid inclusions are most probably related to the mixing of magmatic and basinal fluids. The mineralogical, microthermometry and chemistry of fluid inclusions data show that magmatic-hydrothermal metal bearing fluids, nonmagmatic hydrothermal fluids and mixing of them are responsible for iron-Cu-Au mineralization (IOCG) in the Jalal- Abad deposit.

References
Appold, M.S. and Wenz, Z.J., 2011. Composition of Ore Fluid Inclusions from the Viburnum Trend, Southeast Missouri District, United States: Implications for Transport and Precipitation Mechanisms. Economic Geology, 106(1): 55-78.
Fisher, L.A. and Kendrick, M.A., 2008. Metamorphic fluid origins in the Osborne Fe oxide–Cu–Au deposit, Australia: Evidence from noble gases and halogens. Mineralium Deposita, 43(5): 483–497.
Gillen, D., 2010. A study of IOCG-related hydrothermal fluid in the Wernecke Mountains, Yukon Territory, Canada. Ph.D. thesis, James Cook University, Queensland, Australia, 562 pp.
S Stosch, H.G., Romer, R.L. and Daliran, F., 2011. Uranium–lead ages of apatite from iron oxide ores of the Bafq District, East-Central Iran. Mineralium Deposita, 46(1): 9–21.
Yardley, B.W.D., 2005. 100th Anniversary Special Paper: metal concentrations in crustal fluids and their relationship to ore formation. Economic Geology, 100(4): 613–632.

Keywords


Appold, M.S., Numelin, T.J., Shepherd, T.J. and Chenery, S.R., 2004. Lim it’s on the metal content of fluid inclusions in gangue minerals from the Viburnum Trend, southeast Missouri, determined by laser ablation ICP-MS. Economic Geology, 99(1):185-198.
Appold, M.S. and Wenz, Z.J., 2011. Composition of Ore Fluid Inclusions from the Viburnum Trend, Southeast Missouri District, United States: Implications for Transport and Precipitation Mechanisms. Economic Geology, 106(1): 55-78.
Baker, T., Mustard, R., Williams, P.J., Dong, G., Fisher, L., Mark, G. and Ryan, C.G., 2008. Mixed messages in iron-oxide-copper-gold systems of the Cloncurry district, Australia: insights from PIXE analysis of halogens and copper in fluid inclusions. Mineralium Deposita, 43(6): 599–608.
Barton, M.D. and Johnson, D.A., 2004. Footprints of Fe-oxide (Cu-Au) systems: University of Western Australia. Centre for Global Metallogeny Special Publication, 33:112–116.
Barton, M.D., Kreiner, D.C., Jensen, E.P. and Girardi, J.D., 2011. Superimposed hydrothermal systems and related IOCG and porphyry mineralization near Copiapo. Proceedings of the 11th Biennial SGA Meeting, Society for Geology Applied to Ore Deposits, Antofagasta, Chile.
Fisher, L.A. and Kendrick, M.A., 2008. Metamorphic fluid origins in the Osborne Fe oxide–Cu–Au deposit, Australia: Evidence from noble gases and halogens. Mineralium Deposita, 43(5): 483–497.
Gillen, D., 2010. A study of IOCG-related hydrothermal fluid in the Wernecke Mountains, Yukon Territory, Canada. Ph.D. thesis, James Cook University, Queensland, Australia, 562 pp.
Graupner, T., Bratz, H. and Klemd, R., 2005. LA-ICP-MS micro-analysis of fluid inclusions in quartz using a commercial Merchantek 266 nm Nd:YAG laser: a pilot study. Euroupian Journal of Mineralogy, 17(1): 93–102.
Groves, D.I., Bierlein, F.P., Meinert, L.D. and Hitzman, M.W, 2010. Iron oxide copper–gold (IOCG) deposits through Earth history: implications for origin, lithospheric setting, and distinction from other epigenetic iron oxide deposits. Economic Geology, 105(3):641–654.
Hitzman, M.W., Oreskes, N. and Einaudi, M.T., 1992. Geological characteristics and tectonic setting of Proterozoic iron oxide (Cu-U-Au-REE) deposits. Precambrian Research, 58(1-4): 241-287.
Huckriede, R., Kursten, M. and Venzlaff, H., 1962. Geology of Kerman and Saghand. Geological Survey of Iran, Tehran, Report 51, 197 pp.
Hunt, J.A., Baker, T., Cleverly, J., Davidson, G.J., Fallick, A.E. and Thorkelson, D.J., 2011. Fluid inclusion and stable isotope constraints on the origin of Wernecke Breccia and associated iron oxide–copper–gold mineralization, Yukon. Canadian Journal of Earth Sciences, 48(10): 1425–1445.
Mehrabi, B and Karimi, B., 2003. Jalal-Abad as a hydrothermal iron oxide deposit. The 22nd Geosciences Symposium, Geological Survey of Iran, Tehran, Iran.
Nabavi, M.H., 1979. An introduction to geology of Iran. Geological Survey of Iran, Tehran, 110 pp. (in Persian)
Pollard, P.J., 2006. An intrusion-related origin for Cu–Au mineralization in iron oxide– copper–gold (IOCG) provinces. Mineralium Deposita, 41(2): 179–187.
Ramezani, J. and Tucker, R.D., 2003. The Saghand region, central Iran: U-Pb geochronology, petrogenesis and implications for Gondwana tectonics. American Journal of Science, 303(7): 622-665.
Rieger, A.A., Marschik, R. and Diaz, M., 2010. The hypogene iron oxide copper–gold mineralization in the Mantoverde District. Northern Chile. Economic Geology, 105(7): 1271–1299.
Roeder, E., 1984. Fluid Inclusions. Mineralogical Society of America, Washington, 644 pp.
Shepherd, T.J. and Chenery, S.R., 1995. Laser ablation ICP-MS elemental analysis of individual fluid inclusions: An evaluation study. Geochimica et Cosmochimica Acta, 59(19):3997−4007.
Stoffell, B., Wilkinson, J.J. and Jeffries, T.E., 2004. Metal transport and deposition in hydrothermal veins revealed by 213nm UV laser ablation microanalysis of single fluid inclusions. American Journal of Science, 304(6): 533−557.
Stosch, H.G., Romer, R.L. and Daliran, F., 2011. Uranium–lead ages of apatite from iron oxide ores of the Bafq District, East-Central Iran. Mineralium Deposita, 46(1): 9–21.
Technoexport., 1976. Results of the survery of Zarand ore deposite. National Iranian Steel Company, Tehran, 104 pp.
Vahdati Daneshmand, F., 1990. Geological studies of Zarand area.Geological Survey of Iran, Tehran, 100 pp.
Wilkinson, J.J., 2001. Fluid inclusions in hydrothermal ore deposits. Lithos, 55(1-4): 229–272.
Wilkinson, J.J., Stoffell, B., Wilkinson, C.C., Jeffries, T.E. and Appold, M.S., 2009. Anomalously metal-rich fluids from hydrothermal ore deposits. Science, 323(5915): 764−767.
Williams, P.J., Barton, M.D., Johnson, D.A., Fontbote, L., DeHaller, A., Mark, G., Oliver, N.H.S. and Marschik, R., 2005. Iron oxide copper-gold deposits: geology, space-time distribution and possible modes of origin. Economic Geology, 100(100th Ann): 371–405.
Whitney, D.L. and Evans, B.W., 2010. Abbreviations for names of rock-forming minerals. American Mineralogist, 95(1): 185-187.
Yardley, B.W.D., 2005. 100th Anniversary Special Paper: metal concentrations in crustal fluids and their relationship to ore formation. Economic Geology, 100(4): 613–632.
Yardley, B.W.D. and Graham, J .T. 2002. The origin of salinity in metamorphic fluids. Geofluid, 2(4): 249-256.
Zhang, H.F., Zhu, R.X., Santosh, M., Ying, J.F., Su, B.X. and Hu, Y., 2013. Episodic widespread magma underplating beneath the North China Craton in the Phanerozoic: implications for craton destruction. Gondwana Research, 23(1): 95–107.
CAPTCHA Image